Publicidad
Idiomas disponibles
Idiomas disponibles
IMPORTANT SAFEGUARDS
HOUSEHOLD USE ONLY • READ ALL INSTRUCTIONS BEFORE USE
Read all instructions before using your NINJA SMART SCREEN™ KITCHEN
SYSTEM WITH FRESHVAC™ TECHNOLOGY
When using electrical appliances, basic safety precautions should always
be followed, including the following:
WARNING
To reduce the risk of fire, electric shock,
serious injury, death, or damage when
using this appliance, follow these basic
safety precautions.
GENERAL PRECAUTIONS
30
DO NOT perform grinding operations
with the Single-Serve Cup and Pro
Extractor Blades® Assembly.
31
Before operation, ensure all utensils are
removed from containers. Failure to
remove utensils can cause containers
to shatter and potentially result in
personal injury and property damage.
32
Keep hands and utensils out of
containers while chopping to reduce
the risk of severe personal injury or
damage to the blender/food chopper.
A scraper may be used ONLY when
the blender or processor is not
running. When using the processor,
always use food pusher to add food.
NEVER add food by hand.
33
NEVER operate the appliance without
lids and caps in place. DO NOT attempt
to defeat the interlock mechanism.
Ensure the container and lid are
properly installed before operation.
34
DO NOT expose the containers and
accessories to extreme temperature
changes. They may experience damage.
6
35
NEVER leave the appliance
unattended while in use.
36
DO NOT open lid or pour spout cap
while blender is operating.
37
DO NOT blend hot liquids. Doing so
may result in pressure buildup and
steam exposure that can pose a risk of
the user being burned.
38
If you find unmixed ingredients sticking
to the sides of the pitcher, stop the
appliance, remove the lid, and use a
scraper to dislodge ingredients. NEVER
insert your hands into the pitcher, as
you may contact one of the blades and
experience a laceration.
39
DO NOT attempt to remove the
container and lids from the motor
base while the blade assembly is still
spinning. Allow the appliance to come
to a complete stop before removing lid
and container.
40
Upon completion of blending or
processing, ensure the blade assembly
is removed BEFORE emptying
container's contents. Remove the
blade assembly by carefully grasping
the top of the shaft and lifting it from
the container. Failure to remove the
blade assembly before emptying the
container results in a risk
of laceration.
41
Remove the Pro Extractor Blades®
Assembly from the Single-Serve
Cup upon completion of blending.
DO NOT store ingredients before or
after blending them in the cup with
the blade assembly attached. Some
foods may contain active ingredients
or release gases that will expand if
left in a sealed container, resulting in
excessive pressure buildup that can
pose a risk of injury. For ingredient
storage in the cup, use only Spout
Lid to cover.
42
If the appliance overheats, a thermal
switch will activate and temporarily
disable the motor. To reset, unplug
the appliance and allow it to cool for
approximately 30 minutes before
using again.
43
The maximum wattage rating for
this appliance is based on the
configuration of the Pro Extractor
Blades Assembly and Single-Serve
Cup. Other configurations may draw
less power or current.
SAVE THESE INSTRUCTIONS
44
DO NOT process dry ingredients
without adding liquid to the Single-
Serve Cup. The Single-Serve Cup is
not intended for dry blending.
45
DO NOT submerge the motor base or
touchscreen in water or other liquids.
46
DO NOT spray the motor base or
touchscreen with any liquids. Turn off
and unplug the motor base before
cleaning.
47
DO NOT operate pump during blending.
48
DO NOT operate pump upside down.
49
DO NOT immerse pump in water
or any other liquid.
50
DO NOT incinerate this appliance even
if it is severely damaged. The batteries
can explode in a fire.
ninjakitchen.com
7
Publicidad
