Publicidad
Idiomas disponibles
Idiomas disponibles
ASSEMBLY: HOW TO CORREC-
TLY ASSEMBLE YOUR JUICER
This product is equipped with a safety de-
vice and will function if, and only if, it is cor-
rectly installed.
1. Place the motorised base on a flat surface,
for example a kitchen work surface or a
table, and make sure the appliance is stable.
2. Place the filter stand on the motorised base
so that the pour spout fits into the notch on
the side of the base.
Note: DO NOT USE FORCE, if the pour spout is cor-
rectly positioned above the notch, it will go in easily.
3. Position the pulp receptacle so it firmly locks
into the bottom edge of the appliance.
4. Carefully lock the stainless steel filter into
place on its support.
Note: Be careful not to touch the sharp, pointed
parts at the bottom of the filter to avoid injury.
5. Make sure the filter support is correctly po-
sitioned on the base, so that the spin shaft is
correctly fitted into the stand.
6. Make sure the filter rotates smoothly.
7. Place the lid on the appliance so it covers
both the pulp receptacle and the centrifuge.
8. Make sure the lid is correctly positioned on
the base.
9. Lift the locking mechanism to its vertical po-
sition and make sure that it locks into place
over the lid and blocks it.
Note: The locking mechanism will make a 'click'
sound when it is correctly positioned.
10. Place the included glass, a bowl, or other
appropriate container under the pour spout.
11.Congratulations! The juicer is ready to use!
6
USAGE: HOW TO USE YOUR
JUICER CORRECTLY
ATTENTION:
1.Always unplug the appliance from the out-
let if it is left unsupervised, and before as-
sembly, disassembly, or cleaning.
2. GENTLY press down on fruits and/or vege-
tables with the push rod.
Too much pressure results in less juice ex-
tracted and can damage the appliance.
3. ALWAYS keep an eye on the pulp recep-
tacle and the juice container, and turn off
the appliance before they get too full.
4. ALWAYS turn off the appliance, by turning
the speed selection to "0" before remo-
ving the lid.
5. NEVER run the appliance for more than
3 minutes at a time. If the appliance has
been running for three minutes, let it cool
down for 20 minutes before using it
again.
REMINDER: This product is equipped with a safety
device and will function if, and only if, it is correctly
installed.
• For optimal usage of the appliance and to
reduce risk of damage, we advise that fruits
or vegetables with thick skins be peeled and
the skins removed before using them in the
centrifuge.
1. Completely unwind the power cord.
Note: Make sure the wattage in your country corres-
ponds to the wattage listed on the appliance.
2. Plug the appliance into an electric outlet in
good condition (a grounded one if the ap-
pliance is a class I), to avoid any danger.
3. Never modify the appliance in any way.
4. Turn the appliance off and unplug it from
the power source before assembling or di-
sassembling the pieces or coming near any
parts that are in motion when the appliance
is running.
EN
Publicidad
