Removing The Hook Cover Plate; Inserting The Bobbin - Sears Kenmore 385.17624 Manual De Instrucciones

o Removing the hook cover plate
(D Hook cover plata release button
_) Hook cover plate
Slide the hook cover plate release button (_ to the right, and
remove the cover plate (_)
• Inserting the bobbin
(_) End of thread
(_) Notch
(_) Notch
(_) Threading chart
[] Place a bobbin in the bobbin holder with the thread
running off counterclockwise
[] Guide the thread into the notch (_) on the front side of
the bobbin holder.. Draw the thread to the left, sliding it
between the tension spring blades.
[] Continue to draw the thread lightly until the thread slips
into the notch (_). Pull out about 6" (150cm) of thread.
[] Attach the hook cover plate_ Check the threading by
referring to the chart Q shown on the hook cover plate.
f
[]
[]
[]
[]
\
24