Publicidad
Idiomas disponibles
Idiomas disponibles
9.
Install sidestand
Tighten to 9 Nm using torque tool
o
10. Install pedals
The end of each pedal is marked
o
with either an "L" or "R",
indicating the side of the bike as
seen by the rider when seated on
the bike. The Left pedal has 3
lines on the hex nuts. The Right
pedal is smooth.
Tighten using multi-tool. Finalize
o
tightening with a pedal wrench
(not supplied) to 35Nm
11
Publicidad
