Publicidad
Idiomas disponibles
Idiomas disponibles
Removed from eBicycle
1.
Remove the battery from the eBicycle.
2.
Place the battery in a dry, well
ventilated area near the battery
charger.
3.
Connect the battery adapter cord to
the main charger cord.
4.
Plug the charger into a wall outlet.
5.
Insert the adapter cord into the
charging port on the battery.
6.
The LED indicator on the battery
charger will turn solid green when the
battery is fully charged. Once fully
charged, disconnect the charger from
the battery and the outlet.
DRIVETRAIN
Drive Motor
The drive motor is mid-mounted with
placement near the pedal crank assembly.
An electronic torque sensor automatically
recognizes the pressure the rider applies to
the pedals and instantly provides a
proportionate amount of electric drive
assistance.
Belt Drive
The drive motor is connected to the rear
wheel assembly with a carbon fiber-
reinforced drive belt (similar to motorcycle
drive belts). The drive belt provides
smooth, quiet, and low-maintenance
operation.
Continuously Variable
Transmission
Your eBicycle may come equipped with an
electronically controlled CVT (Continuously
Variable Transmission) on the rear hub
that delivers seamless gear changes and
transmission of power at any speed. There
is no shifting required; the transmission
automatically adjusts the gear ratio as
terrain or speed changes. The
transmission is fully enclosed without any
exposed components and requires no
maintenance.
17
Publicidad
