Publicidad
Idiomas disponibles
Idiomas disponibles
8.
Install the lower hinge on the left side of the cabinet. Install the adjustable foot at the right.
9.
Remove the screw that secures the door stop from the bottom right of the refrigerator door, then remove
the door stop and install to the bottom left side.
10. Install the refrigerator door.
11. Move the door bushing from the top right side of the refrigerator door to the top left side of the door. Move
the left hole cover to the right side.
12. Secure the upper hinge to the top left side of the cabinet with the three screws you removed previously.
Before you tighten the upper hinge screws, make sure that the top of the door is level with the cabinet and
that the rubber gasket makes a good seal.
Simple fault analysis and elimination
With regard to the following small faults, not every failure needs to be fixed by the technical service personnel;
you can try to solve the problem.
Case
Inspection
• Is power plug off?
• Are breakers and fuses broken?
• Where is the refrigerator installed? Is it
Completely
placed in balconies, garages, storage
non-
rooms and other places where the
refrigeration
ambient temperature is below 10℃?
Solutions
• Re-plug
• Opening the door and checking whether
the lamp is lit.
• Install the refrigerator in a location that
is protected and the ambient
temperature is above 10 ℃. If your
refrigerator is installed in too low
temperature, the internal cooling
system may not work correctly.
- 13 -
Publicidad
