Lotus SmarTime 50032 Manual De Usuario página 10

2.4 Music
When connected to the APP, you can con-
trol the mobile phone music (previous song,
next song, start, pause function, volume).
2.5 Work out
Choose between Walking, Running, Cycling,
Hiking, Basketball, Yoga and Elliptical.
By pressing the sport selected, the session
start. Slide from left to right to pause and
click to end the sport and save the data.
The session will be saved if it last more than
5 min. Otherwise screen pops up "too little
data to save".
2.6 Data
Your daily Steps, Calories and Distance are
displayed here.
2.7 Workout records
Analyze your work out records data. Also visi-
ble in app after sync. Swipe up to find all work
out data.
2.8 Heart rate
Wear the watch on your wrist, enter Heart rate
and it starts to measure. The data will be out-
put in 10 seconds, and the measurement is
completed in 10-20 seconds.
2.9 Blood pressure
Wear the watch on your wrist, enter Blood
pressure and it starts to measure. The data
will be output in 10 seconds, and the mea-
surement is completed in 10-20 seconds.
2.10 Sleep
Your sleep duration and quality will be record-
ed every day from 21 o'clock PM to 12 o'clock
AM in next morning. View deep sleep, light
sleep, and total sleep duration. Please con-
nect to the APP daily to sync your sleep data.
2.11 Alarm
Connect the APP and set the Alarm in the
APP. The alarm will be synced to the watch
and can be turned on/off in the watch.
2.12 Stopwatch
Press the arrow to start.
2.13 Timer
Press selected time and press arrow to start.
The watch vibrate when time is over.
2.14 Messages:
Connect to the APP. The APP needs to ob-
tain the SMS or other APP notification per-
mission of the mobile phone first. Then the
device will synchronize the notifications from
mobile phone.
2.15 Find phone
Connect the watch with the APP, click "Find
phone", phone vibrates and sound unless
muted.
2.16 Settings
2.16.1 Languages:
There are 6 optional languages. The lan-
guage of the watch will be identical with the
language of the phone that it connects to. If
not available, the default language is English.
2.16.2 Display:
1) Watch face switch, there are five built-in
watch faces for optional, but you can also
download from app for options.
2) Brightness, set display brightness.
3) Screen time, set the display light time du-
ration.
4) Raise to wake, when enabled you can light
up the display by rotating your wrist.
5) Vibration intensity, set any of three levels.
6) Menu style, set List style menu or Smart
style menu.
7) QR code, scan the QR code to download
the APP.
8) Power saving mode, when enabled the
brightness of screen turn to lower level and
Bluetooth will be turned off.
9) System:
About, Bluetooth name, Mac address and
Firmware version
Reset, click "√" to reset the watch and click
"X" to cancel the factory reset.
Shutdown: click "√" to power off the watch
and click "X" to cancel the shutdown.
10 10