Descargar Imprimir esta página

Lotus SmarTime 50032 Manual De Usuario página 9

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 1
This product should not be worn when show-
ering or used in a sauna/steam room as it is
not possible to prevent steam entering the
watch. Any water damage to the product due
to non-compliance to this instruction will not
be covered by the warranty.
1. Introducción a
las funciones
1.1 Buttons:
A: Press the button to enter into sports mode
or to wake up the display.
B: Press and hold on the button to turn on/off
the watch. Press the button to turn on/off the
display. Or press to get back to the dial from
any function.
1.2 Charging Guide
Magnetic charging is as shown below. Sup-
ports PC USB or 5V charger. It takes about 2
hours to fully charge.
Be aware that the two pins of the USB
cable are not allowed to contact the conduc-
tor at the same time, or it will cause short cir-
cuit and burn.
1.3 Shortcuts
1) Slide left to right to enter the default ro-
tating menu interface, rotate the menu, click
an Icon or Word to select the functions, press
button B to back to the screen.
2) Slide down to find shortcuts
3) Slide right to left to enter Data, Heart Rate
and again for Sleep data.
4) Slide up to find messages.
5) Press and hold the Dial to change the Dial
and press to confirm.
1.4 Down slide menu
1)
Non disturb mode
2)
Power saving mode
3)
Audio Bluetooth, on & off
4)
Brightness adjustment
5)
Settings (Languages, Display,
Vibration, Menu style, QR Code,
Battery, System)
6)
Find phone
Slide to left to find Page 2:
7)
About, shows FW version and MAC
8)
Shutdown
2. Menu
2.1 Call records
can save the records of connected and di-
aled calls. It can save more than 10 call re-
cords, and it will be automatically overwritten
when full. Click any call record to call back.
2.2 Contact person
Connect the APP, enter the APP - Device -
Frequent contacts - Add contacts - Sync to
watch (can sync 10 frequently contacts).
2.3 Telephone
Press "Audio Bluetooth" Icon to turn on/off
the Bluetooth calling. When the Bluetooth
calling is turned on, the Audio Bluetooth
Name, like BT-XXX is visible. Go to the Blue-
tooth of phone and connect the Audio Blue-
tooth. After the Audio Bluetooth connection
is done, you can use the watch to answer/
hang up the phone.
Remarks: Audio Bluetooth will auto turn off
after half an hour. It can auto connect to the
phone when it is activated.
9
9

Publicidad

loading

Este manual también es adecuado para:

5003350034