Wattage Reference Chart
WARNING
You must isolate the generating set from electric utility
by opening the electrical system's main circuit breaker
or main switch if the generating set is used for backup
power. Failure to isolate the generating set from the
power utility may result in injury or death to electric
utility workers and damage to the generating set due
to backfeed of electrical energy.
www.ducsonpower.com
3.4 STOPPING THE GENERATING SET
1. Remove all the load on generating set.
2. Turn off AC breaker protector.
Remove the plug of all electric equipment from the
generating set panel.
WARNING
NEVER stop the engine with electrical devices
connected and with the connected devices turned
"ON".
3. Allow the generating set run at no load for a few
minutes to stabilize internal temperatures of the
engine and generating set.
4. Turn off the flameout switch (turn the engine switch
to "OFF" position.
11