WEG Cassia X1000 Manual General De Instalación Y Operación página 24

Field Name
Gateway Name
Gateway Mode
Tx Power
Statistics Report
Interval
AC Server Address
AC-Gateway Protocol
Priority
Connection Priority
Enable OAuth2 Token
for Local API
Remote Assistance
Once all the fields above have been filled in and saved by clicking on the "Apply" button, we can go to the
configuration of the internet gateway connection also located on the "Basics" tab.
5.4 CONNECT GATEWAY TO THE INTERNET
5.4.1 Via Ethernet
Still on the "Basic" tab, we can configure the Cassia X1000 gateway to connect to the internet via Ethernet. The
Ethernet connection has two modes: DHCP and Static.
In the DHCP mode, the gateway would ask the ethernet network of the installed infrastructure for an IP address,
which will be automatically provided by the infrastructure DHCP server. In this mode, it is possible to inform two
IP addresses for DNS; however, in the WEG application, these fields can be empty.
In Static mode, you must inform the IP address, the netmask and the "Gateway" of the local ethernet network.
This "Gateway" would be the equipment responsible for managing the ethernet network of the infrastructure on
which the Cassia X1000 is installed). DNS fields can be left blank as they will not be used for the WEG application.
Table 5.1: Table with the gateway basic data configuration fields
Default Value
The name entered in this field will be used to identify the gateway in the WEG
Motion Fleet Management Platform
AC Managed Gateway operating mode. Keep this field as "AC Managed Gateway" so that
Gateway it can be used with the WEG system
20 Bluetooth signal strength. Keep it at 20 for maximum strength
30 Seconds Time interval for updating the gateway status together with the WEG system
Insert the address "cassia.weg.net" so that the gateway can be used with the
cassia.weg.net
WEG system
Protocol used to communicate with the gateway management system. Keep
MQTT
MQTT for best results
Select the type of internet connection previously chosen for the infrastructure.
Wired
The options are "Wired" (Ethernet), "Wi-Fi" and "Cellular" (3G/4G)
OFF This option is not used in the WEG system. Keep it as "OFF"
This option opens a channel for WEG assistance. If you need more security
ON
on the network, keep it as "OFF"
Figure 5.6: Fields for configuring the Ethernet network in DHCP mode
Gateway Setup
Description
Gateway Cassia X1000 | 24