Unpacking And Set Up; Scope Of Delivery; Note On Ambient Surrounding; Setting Up The Instrument - MACHEREY-NAGEL QUANTOFIX Relax Manual Del Usuario

8. Unpacking and set up

8.1 Scope of delivery

 QUANTOFIX Relax reflectometer
®
 Power pack 100 – 240 V, 47/63 Hz, 9 V, incl. 4 adapters
 Printer paper
d User manual (this booklet)
e Quick start guide (different languages)
Check all delivered parts for visible damages. In case a part is damaged, please contact your
local distributor or MACHEREY‑NAGEL.
Read the operating manual for QUANTOFIX
ensure an error free operation.

8.2 Note on ambient surrounding

If the device is exposed to higher temperature fluctuations (e.g. after transport or distribution),
it must be switched on not before sufficient acclimatization is given. The device should not
be used close to electrical fields (e.g. by microwaves, radio units et cetera). In worst case the
measurement results can be affected.

8.3 Setting up the instrument

Place the instrument on a hard, even surface where humidity and temperature are fairly
constant. Make sure that the instrument is allowed to acclimate to room temperature prior to
use.
Make sure that you
• Do not place the instrument near strong electromagnetic fields
• Do not place the instrument near heating plates, ovens or radiators
• Do not expose the instrument to strong light sources (i.e. direct sunlight)
Manual QUANTOFIX
60

Pic. 6: Content
Relax carefully before the first startup in order to
®
Relax EN, V2.00 / 02.22
®

