MACHEREY-NAGEL QUANTOFIX Relax Manual Del Usuario página 67

9.2 Entering a sample ID
shows the sample ID for the next measurement. To enter or change the sample ID,
press . The input menu appears and you can enter the desired sample ID. The following
measurements are then always run and saved using the same sample ID. Using the search
mode you can retrieve the results from the instrument memory. You can also enter the sample
ID using a barcode scanner or a keyboard.
Display 4: Entering ID (numeric)
• Using a standard PC‑keyboard: Connect the keyboard to the USB‑A interface in the
backside of the instrument.
• Using a bar code reader: Connect the barcode reader to the USB‑A interface in the
backside of the instrument.
9.3 Measurement procedure
It is important to place the test strip at the far end of the slide's recess. You can easily
move the strip forward on the recess using your finger (make sure to not touch the test
field!).
NOTICE
Manual QUANTOFIX
Display 5: Entering ID (letter)
Relax EN, V2.00 / 02.22
® 67