13. Equipment Settings
Enter the main menu by pressing the menu key
to reach the "SETTINGS" display press
). Use the arrow buttons to choose an entry and confirm your choice with
.
Display 19: Admin settings
13.1 Test strips
Within the "Test strip" menu there are three more options. Favorites allow you to define test
strips for the "Favorites" menu (see Chapter 13.2 "Favorites"). Additionally, you can activate or
disable the confidence interval message in the display.
The option "Correction" allows for the adjustment of the factory‑provided parameter calibration
to account for matrix effects and interferences during the analysis. Use the arrow buttons to
choose an entry and confirm your choice with
.
If you press
you get back to the settings.
13.2 Favorites
You can define up to 5 different test strips as favorites. These favorites are saved and will
appear in the "Favorites" menu. You can access the favorite's selection menu via
in the
start screen. The favorites option allows you to pre‑define your most frequently used tests, so
that you can quickly and easily switch between test strips. The menu shows a list with all tests
and parameters that are programmed for evaluation in the instrument. On the left side of the
screen, you can see the test names. On the right hand side of the name, directly next to the
arrow buttons, you can see a confirmation symbol, given the respective test has been marked
as a favorite in the first place.
To select a test as a favorite, go to the test using the arrow buttons and press
. The
confirmation symbol appears behind the test, it has been included into the favorite menu. You
can deactivate parameters from the favorite list in the same way.
The favorite list can include only 5 tests. If there are already 5 tests activated within the list, you
have to deactivate a test first in order to choose a new favorite.
To leave the menu, press
, and you will get back to the start screen.
Manual QUANTOFIX
Relax EN, V2.00 / 02.22
®
75