Whirlpool 20K Manual Del Usuario página 52

AIRFLOW DIRECTION CONTROL
5. Airflow direction control
Vertical airflow is automatically adjusted to a
certain angle in accordance with the operation
mode after turning on the unit.
The direction of airflow can be also adjusted to
your own requirement by pressing the "SWING"
button of the remote contrai.
Operation mode
COOLING, DRY
*HEATING, FAN ONLY
*Heating mode is only available for heat pump
models.
Vertical airflow control (using the remote
control)
Use the remote contrai to set the flow angles.
Swinging airflow
Pressing "SWING" button once, the vertical
adjustment louver will swing up and down
automatically.
Desired direction airflow
Pressing the "SWING" button again when the
louvers swing to a suitable angle as desired.
Horizontal airflow control (with hands)
Turn the contrai rods of the horizontal adjustment
louvers to change horizontal air flow as shown.
Note: The shape of the unit may look different
from that of the air conditioner you have selected.
A - Do not turn the vertical adjustment louvers
manually, otherwise malfunction may occur. lf
that happens, turn off the unit fìrst and cut off
the power supply, then restare power supply
again.
B - lt is better not to let the vertical adjustment
louver tilt downward for a long time at
COOLING or DRY mode to prevent
condensed water from dripping.
Direction of airflow
horizontal
downward
52
-
- -
-
In verter Plus
I � ;
*
sa
88:88
°e
-
-- -
O n/Off
Around U Dim
Timer On Timer Off Power
Clock Save
Super Silent
control rod of vertical
adjustment louvers