Wiesenfield WIE-CCD-600 Manual De Instrucciones página 34

Using a flat head screwdriver (not supplied), turn the knob towards the moon
•
symbol to open the door earlier and close later.
Using a flat head screwdriver (not supplied), turn the knob towards the sun
•
symbol to open the door later and close earlier.
Adjusting the door height
a) Open the transparent cover of the controller.
b) Cover the light sensor with the black plug provided - the door will close.
c) Press and hold the "UP (RST)" button - the door will begin to open.
d) Uncover the light sensor when the door is at the correct height (it will uncover
the entrance).
e) Release the "UP (RST)" button
f) Put the transparent cover of the controller back.
Manually opening/closing of the door
When the door is open, press the "UP (RST)" button to temporarily close the
•
door manually (the door will open automatically after 3 minutes).
When the door is closed, press the "UP (RST)" button to temporarily open the
•
door manually (the door will close automatically after 3 minutes).