Siemens SINUMERIK 802D sl Manual De Instrucciones página 10

Índice de los datos de máquina/operador
24760 |TRAANG_BASE_TOOL_2, 2–44
24770 |TRAANG_PARALLEL_VELO_RES_2, 2–44
24771 |TRAANG_PARALLEL_ACCEL_RES_2, 2–44
24800, 4–86
24800 |TRACYL_ROT_AX_OFFSET_1, 2–44
24805 |TRACYL_ROT_AX_FRAME_1, 2–44
24808 |TRACYL_DEFAULT_MODE_1, 2–45
24810, 4–86
24810 |TRACYL_ROT_SIGN_IS_PLUS_1, 2–45
24820, 4–86
24820 |TRACYL_BASE_TOOL_1, 2–45
24850 |TRACYL_ROT_AX_OFFSET_2, 2–45
24855 |TRACYL_ROT_AX_FRAME_2, 2–45
24858 |TRACYL_DEFAULT_MODE_2, 2–45
24860 |TRACYL_ROT_SIGN_IS_PLUS_2, 2–45
24870 |TRACYL_BASE_TOOL_2, 2–45
24900, 4–87
24900 |TRANSMIT_ROT_AX_OFFSET_1, 2–45
24905 |TRANSMIT_ROT_AX_FRAME_1, 2–45
24910, 4–87
24910 |TRANSMIT_ROT_SIGN_IS_PLUS_1, 2–46
24911, 4–87
24911 |TRANSMIT_POLE_SIDE_FIX_1, 2–46
24920, 4–87
24920 |TRANSMIT_BASE_TOOL_1, 2–46
24950 |TRANSMIT_ROT_AX_OFFSET_2, 2–46
24955 |TRANSMIT_ROT_AX_FRAME_2, 2–46
24960 |TRANSMIT_ROT_SIGN_IS_PLUS_2, 2–46
24961 |TRANSMIT_POLE_SIDE_FIX_2, 2–46
24970 |TRANSMIT_BASE_TOOL_2, 2–46
26000 |PUNCHNIB_ASSIGN_FASTIN, 2–46
26002 |PUNCHNIB_ASSIGN_FASTOUT, 2–46
26004 |NIBBLE_PUNCH_OUTMASK, 2–47
26006 |NIBBLE_PUNCH_INMASK, 2–47
26008 |NIBBLE_PUNCH_CODE, 2–47
26010 |PUNCHNIB_AXIS_MASK, 2–47
x
26012 |PUNCHNIB_ACTIVATION, 2–47
26014 |PUNCH_PATH_SPLITTING, 2–47
26016 |PUNCH_PARTITION_TYPE, 2–47
26018 |NIBBLE_PRE_START_TIME, 2–47
26020 |NIBBLE_SIGNAL_CHECK, 2–47
27100 |ABSBLOCK_FUNCTION_MASK, 2–47
27400 |OEM_CHAN_INFO, 2–48
27800, 4–87
27800 |TECHNOLOGY_MODE, 2–48
27860, 4–88
27860 |PROCESSTIMER_MODE, 2–48
27880, 4–89
27880 |PART_COUNTER, 2–48
27882, 4–89
27882 |PART_COUNTER_MCODE, 2–48
280 |V24_PPI_ADDR_PLC, 2–24
281 |V24_PPI_ADDR_NCK, 2–24
28400 |MM_ABSBLOCK, 2–48
28402 |MM_ABSBLOCK_BUFFER_CONF, 2–48
289, 4–76
289 |CTM_SIMULATION_TIME_NEW_POS, 2–24
290, 4–76
290 |CTM_POS_COORDINATE_SYSTEM, 2–24
291, 4–76
291 |CTM_CROSS_AX_DIAMETER_ON, 2–25
292, 4–76
292 |CTM_G91_DIAMETER_ON, 2–25
30100 |CTRLOUT_SEGMENT_NR, 2–49
30110, 4–90
30110 |CTRLOUT_MODULE_NR, 2–49
30120, 4–90
30120 |CTRLOUT_NR, 2–49
30130, 4–90
30130 |CTRLOUT_TYPE, 2–49
30134, 4–90
30134 |IS_UNIPOLAR_OUTPUT, 2–49
SINUMERIK 802D sl Listas (LIS), Edición 02/2006
6FC5397–5CP10–0EA0