Publicidad
Idiomas disponibles
Idiomas disponibles
4. Head Holder torque wrench should be used with heads.If using special heads, please set
torque as formula.
5. Make sure that you adjust the wrench to the exact torque units your specifications call for, or
you will severely under-torque or over-torque, causing severe damage to the equipment you
are working on.
6. Do not disassemble the wrench for any reason. Highly stressed internal components may
cause severe injury when released in an unintended manner.
7. The wrench should be re-calibrated periodically. The calibration of the wrench should be
checked at least once a year, after any abnormal handling or overloading, or after 5,000
cycles ("clicks").
1. Fixed Ratchet head
countercklockwise for
clockwise direction.
2. Head holder
16
HEAD TYPES
45-tooth reversible ratchet:wrench operates
in both clockwise and counterclockwise direction.
However, unless stated otherwise, the wrech is
calibrated in clockwise direction only.
or countercklockwise direction.
Twist shifter cap
Twist shifter cap clockwise
Holds different size Ratchet
Heads, Open End, Box End or
Open Box End heads.
Publicidad
