Publicidad
Idiomas disponibles
Idiomas disponibles
1. Insert an appropriate socket or drive attachment onto the square drive of the ratchet and
onto the fastener you want to tighten.
2. Apply hand pressure to the grip, and ONLY TO THE GRIP. You may support the wrench
at the ratchet head with the other hand to steady it, especially when using long socket
extensions, without appreciably affecting the accuracy of the wrench.
3. If, due to the required effort, you need to use both hands, put the other hand on the top of
the first hand, never on any other part of the wrench.
4. Apply slow and steady pull or push until the wrench momentarily releases, with or without a
distinct "click" sound. Release the pressure right at this point. DO NOT OVERTORQUE!
Overtorqued or defective fasteners, sockets, as well as the wrench itself, may suddenly
break causing you to lose balance, fall, or to suffer other trauma. Be sure that you have firm
footing, are properly balanced, and if necessary are using appropriate harness, back support, or
other safety device.
1. When not in use, adjust the wrench to its lowest reading ,and store it in the provided case.
2. With the exception of the ratchet mechanism, do not lubricate the wrench. The ratchet
mechanism may be lubricated as needed with a few drops of light machine oil.
3. Do not use acetone or other solvents to clean the wrench, use window cleaner or denatured
alcohol applied with a clean cloth instead.
4. With the exception of the ratchet mechanism, there are no user-serviceable parts. Do not
disassemble the torque wrench for any reason. When service is needed, send the wrench to
the nearest factory-authorized service center.
This torque wrench is certified to have been calibrated prior to shipment to the accuracy of
+/- 4% in the clockwise direction.
HOW TO ADJUST LOW READING CALIBRATION ( OFFSET )
Step 1: With the torque wrenches adjusted to its lowest reading, and with the Lock Knob
(Item 11) in a locked position, turn the Lock Knob counterclockwise while holding the wrench
firmly by the grip. If the Lock Knob cannot be loosened by hand, use soft-jaw pliers or strap
wrench only so you will not damage its surface.
20
APPLYING TORQUE
SAFETY WARNING
MAINTANANCE
CERTIFICATION
Publicidad
