Ega Master 66001 Manual De Instrucciones página 21

Step 2: Using 4mm Allen wrench loosen and remove the Lock Screw (item 14)
Step 3: Remove Lock Ball (item 15) by turning the wrench so the grip is pointing down and if
necessary gently tapping it with a hand.
Step 4: Adjust torque by turning Adjusting Screw (Item 17) clockwise to increase it and
counterclockwise to decrease it using 4mm Allen wrench.
Step 5: When desired torque is achieved, re-assemble the wrench in the reverse order
shown above. Make sure that Lock Screw and Lock Knob are tightened firmly so they will not
become loose in use.
21