Publicidad
Idiomas disponibles
Idiomas disponibles
ENERGY
Your new portable amplifier can be used with rechargeable or alkaline batteries (non rechargeable).
If you use alkaline batteries:
1.- Open the battery compartment and place 6 AA batteries, please, pay attention to polarity.
2.- Replace the cover and turn the equipment on.
If you use rechargeable batteries (not included):
1.- Open the battery compartment and place 6 AA batteries, please, pay attention to polarity.
2.- Replace the cover.
3.- Plug the AC adapter to RECHARGE input jack, then plug into an outlet.
4.- The charge indicator LED will light on, it will light off when the batteries are fully charged.
5.- Unplug the AC adapter from the amplifier.
Make sure to place 6 batteries into the compartment, otherwise the charge process will not begin.
Make sure the amplifier is off before to charge batteries. First time you charge batteries, do it
for 14 hours. That you can charge the batteries normally. Fully discharge the batteries before to charge
them again, to improve its life.
HEADSET ASSEMBLY
1.- Put the microphone into the holder.
2.- Insert the cable holder into the headset holder,
press until you hear a click.
12
Publicidad
