Human Touch Circa ZG Manual De Uso Y Cuidado página 5

5. Tip the chair to the upright position.
6. Confirm that the chair swivels (Fig.4).
NOTE: For safety reasons, the chair will not swivel
when it is reclined past a 125-degree angle.
INSTALL THE POWER SUPPLY
1. Plug the power supply into the power cable coming from the chair (Fig.5).
2. Flip the cable lock to the horizontal position to secure the connection.
3. Plug one end of the power cable into the power supply and the other into a wall outlet.
Power supply
Power cable
humantouch.com
Fig.4
Power cable
from chair
Fig.5
Flip the cable lock closed
6
INSTALL THE HEAD PILLOW
Place the head pillow in the desired position (Fig.6).
PLACE THE REMOTE
Slide the remote control loop over the mounting post on the right-hand side of the chair (Fig.6).
Fig.6
7