Publicidad
Idiomas disponibles
Idiomas disponibles
IntelliDose fill / empty
• Open the automatic dosing cover
and remove the concentrate bag.
• Press and hold the IntelliDose button
(see page 107) for 2 seconds.
• Press again the IntelliDose button in
order to get to the setting for empty-
ing the system.
• Confirm the start of emptying by
pressing the right service button.
• Insert the new concentrate bag and
close the cover of the automatic dos-
ing.
• Fill the system by pressing the Intel-
liDose button.
• Filling the system takes about 18.
seconds.
Notice:
The IntelliDose is now ready for use.
- Note the settings for concentrate and high concen-
trate in the following section.
Setting concentrate and high concentrate
• Press and hold the Eco-Mode and Cleaning solution supply
button (see page 107) for 2 seconds.
The power user menu appears in the display.
• Press again the Eco-Mode button in order to get to the set-
ting between concentrate and high concentrate.
• The Cleaning solution supply amount buttons can be used
to select between concentrate (0.2% - 0.5%) and high con-
centrate (1% - 2.5%).
• Press the Cleaning solution supply button to confirm the
selection.
IntelliDose dosing settings
• Press and hold the IntelliDose button for 2 seconds.
In the display, appear the menu for setting the dosage.
• With the service buttons, the dosage can be set according
to the preferences of the concentrate.
• By pressing the IntelliDose button again, the settings are
confirmed.
Reset statistics (touchscreen only)
The statistics can be reset by selecting and holding one of the two dis-
plays [A].
• Select "Confirm" on the subsequent
message to reset the statistics.
Reset Statistics
Confirm
Cancel
A
Pre-cleaning
Warning:
Remove any objects (wooden, metal parts etc.)
from the cleaning surface.
The objects could be catapulted by the rotating tool, and
thereby cause injuries to people and damage to the en-
vironment.
Beginning work with the machine
Warning:
Always wear slip-resistant shoes and appropriate
working clothes when working with this machine!
Notice:
To ensure safe operation, always keep both hands
on the steering wheel/driving handle while operat-
ing the machine.
Warning:
When driving the machine for the first time, test it
out in an empty space to get familiar with the ma-
chine.
Warning:
If there is a danger of falling objects during use of
the machine, the necessary safety precautions
must be taken or adhered to in accordance with na-
tional regulations.
• Lower the suction nozzle.
Variant: Automatic brush lowering (Option ULTIMAXX Premium)
• Press the Brush drive button ON/
OFF.
Variant: Foot pedal
• Unlock the foot pedal and lower the
tool slowly.
113
Publicidad
