Pressure does not build up in the
appliance
Set the pressure and quantity regula-
tion to "MAX".
Check the nozzle size, install correct
nozzle.
Clean the nozzle.
Replace the nozzle.
Deaerate the appliance (see "Start-up")
Check water supply level (refer to tech-
nical data).
Clean water filter.
Check all inlet pipes to the pump.
Contact Customer Service if needed.
Pump leaky
3 drops per minute are permitted and can
come out from the lower side of the appli-
ance. Call Customer Service if there is
heavy leakage.
With stronger leak, have device
checked by customer service.
Pump is vibrating
Clean water filter.
Check the water suction pipes for leaks.
Deaerate the appliance (see "Start-up")
Contact Customer Service if needed.
Water leak on the thermovalve
This function is not a fault. If the appliance
becomes too hot in the circulation mode,
the thermovalve opens so that cold water
can flow in.
Water leak at the safety valve
Turn off the appliance, wait briefly, turn
on the appliance once again.
If the fault appears again afterwards, do
no longer use the appliance. Have the
device checked by aftersales service.
Accessories and Spare Parts
Only use original accessories and spare
parts, they ensure the safe and trouble-free
operation of the device.
For information about accessories and spare
parts, please visit www.kaercher.com.
The warranty terms published by the rele-
vant sales company are applicable in each
country. We will repair potential failures of
your appliance within the warranty period
free of charge, provided that such failure is
caused by faulty material or defects in man-
ufacturing. In the event of a warranty claim
please contact your dealer or the nearest
authorized Customer Service center.
Please submit the proof of purchase.
EU Declaration of Conformity
We hereby declare that the machine de-
scribed below complies with the relevant
basic safety and health requirements of the
EU Directives, both in its basic design and
construction as well as in the version put
into circulation by us. This declaration shall
cease to be valid if the machine is modified
without our prior approval.
Product:
Type:
Relevant EU Directives
2000/14/EG
2006/42/EG (+2009/127/EG)
2011/65/EU
2014/30/EU
2009/125/EG
Harmonised directive(s)
(EU) 2009/1781
Applied harmonized standards
EN 60335–1
EN 60335–2–79
EN IEC 63000: 2018
EN 55014-1: 2017 + A11: 2020
EN 55014–2: 2015
EN 61000–3–2: 2014
EN 61000–3–11: 2000
EN 62233: 2008
– 9
EN
Warranty
High pressure cleaner
1.367-xxx
23