Gymrex GR-MG77 Manual De Instrucciones página 30

Step 1 Assemble the Standing Frame
Unfold and fix the standing frame using 4 M8x50mm Allen head screws (S2) and 4
M8x40mm Allen head screws (S3) on both sides. Fix the horizontal frame using 4
M8x16mm Allen head screws (S5) and the two rear caps using 2 M6x16mm Phillips
head screws (S6).
Step 2 Assembling the computer unit
Important: Two people are required to work together during assembly. One person
holds the computer unit while the other person tightens the screws using the Allen
key (S1) included in the kit.
First, connect the signal cable from the computer assembly to the signal cable from
the standing frame. Then secure the computer assembly to the stand frame using 2
M8x30mm Allen head screws with nuts (S4) on both sides. Tighten the screws using
the supplied Allen key (S1).
A. Cable connector for connection