Publicidad
Idiomas disponibles
Idiomas disponibles
user's clothing. In the event of a fall, the attached clip will pull the safety key out of
the computer console and result in an immediate emergency stop of the running
belt to help prevent injury.
To restart the treadmill and begin exercising, insert the safety key into the computer
console and press the START button.
3.4. Cleaning and maintenance
a)
Pull the mains plug and let the unit cool down completely before cleaning,
adjusting or replacing accessories and when the unit is not in use.
Wait until the rotating parts stop.
•
b)
Use only non-corrosive cleaning agents for cleaning the surfaces.
c)
Store the unit in a dry and cool place protected from moisture and direct
sunlight.
d)
Do not spray the unit with a stream of water or immerse it in water.
e)
Make sure that no water enters through the ventilation openings in the casing.
f)
Perform regular inspections of the unit checking technical fitness and any
damages.
g)
Use a soft cloth for cleaning.
h)
Do not use sharp and/or metal objects (e.g. a wire brush or metal spatula) for
cleaning, as these may damage the surface of the material from which the unit
is made.
i)
Do not clean the unit with acidic substances, medical products, thinners, fuel,
oil or other chemicals as this may damage the unit.
j)
Lubricate the friction parts of the belt regularly with the oil provided.
Depending on frequency of use, lubricate: once a year - every 3 months.
k)
Regularly check the tension of the belt - a belt that is too loose may slip, while
one that is too tight may make noise during operation and as a result
contribute to faster wear of the components. A properly tensioned belt should
be able to lift 50-75 mm in the center of the treadmill.
C. Safety key slot
Publicidad
