VITO PRO-POWER Manual De Instrucciones página 22

EN
compatible with the machine. Only
perform this operation with the
machine disconnected from the
mains supply.
NOTE: It is recommended that
the operator considers wearing
protective gloves when handing the
blade during installation or when
changing the machines blade.
Cross recesses
screws
screw off
1. Ensure the machine is in "Mitre
Saw" mode with the "Cutting Head"
in its upper position.
2.Release the "Retractable Lower
Blade Guard" by cross screwdrives.
and safely storing its pivot screw.
Undo
Bayonet
spanner
3. Use the "Bayonet Spanner"
(provided) to hold the "Circular and
Concave Hole" of the blade flange.
4. Use the "6mm Hex Key"
(provided) to unscrew the arbor
screw.
NOTE: The arbor screw has a left
hand thread turn clockwise to undo
and counterclockwise to tighten.
Tel.: +351 256 331 080
Fax.: +351 256 331 089
1. Remove the arbor screw, washer www.centrallobao.pt
dcomercial@centrallobao.pt and outer blade flange.
22
2. Manually operate the "Lower
Blade Guard" and retract it fully up
into the body of the machine.
3. Remove the balde by withdrawing
it outwards to clear the end to of
the arbor and then downwards and
forwards away from the machine.
DECLARATION
CÓDIGO
OF CONFORMITY
VISCC12210
We declare under our exclusive
responsibility, that the product
Meets the following standards
or standardization documents:
EN 61029-1:2009+A11, EN 61029-
2-11:2012+A11, AfPS GS 2014:01,
EN 55014-1:2017, EN 55014-
2:2015, EN IEC 61000-3-2:2019,
EN 61000-3-3:2013, according to
the determinations of the directives:
2006/42/EU - Machinery
Directive;
2014/30/EU - Electromagnetic
Compatibility Directive.
S. João de Ver, 30th June of 2021.
Central Lobão S.A.
Central Lobão S. A.
O Técnico Responsável
Responsible for the Technical File
Hugo Santos Hugo Santos
6mm
Hex key
WARRANTY TERMS
The warranty of this machine is two
21
years from the date of purchase.
You should, therefore, keep your
proof of purchase during this period
of time. The warranty covers any
manufacturing defect in material or
operating, as well as parts and work
needed for their recovery.Excluded
from the warranty the misuse of the
product, any repairs carried out by
unauthorized persons (outside the
service center of the brand VITO),
as well as any damage caused by
the use of it.