Magellan MobileMapper Pro Guía De Inicio página 24

Site ID screen
18
- Use the down/up arrow to highlight the "Post-processing"
job mode and press ENTER. The screen now lists all the
features available from the selected feature library.
- At this stage, use MobileMapper Pro in exactly the same
way as you would without the post-processing option. See
page 7 and following. In particular, you will download the
job exactly in the same way as you would without the Post-
Processing option.
Using MobileMapper Pro as a Reference Station
- Mount MobileMapper Pro on a tripod placed over a control
point and turn the receiver on
- Press LOG. MobileMapper Pro displays the Welcome
screen.
- Highlight Reference Station and press ENTER. The Site ID
screen is now displayed.
- Enter a Site ID (there is a four-character limit) as you
would enter a job name, highlight OK on the screen and
press ENTER.
From now on MobileMapper Pro will operate as a reference
station until you turn it off. Before leaving the reference
station for your work, press the NAV key and browse
through the various navigation screens to make sure the
receiver is calculating its position.
6. Downloading Data to the PC
Now it is time to come back inside to the PC where you in-
stalled MobileMapper Office. There are two ways you can es-
tablish communications between the MobileMapper Pro
receiver and the MobileMapper Office: via the MobileMapper
Pro data cable or its internal SD (Secure Digital) memory card.