Descargar Imprimir esta página

Stihl HTA 50.0 Manual De Instrucciones página 38

Ocultar thumbs Ver también para HTA 50.0:

Publicidad

Idiomas disponibles

Idiomas disponibles

English
Your pole pruner comes standard with a chain scabbard that
matches the cutting attachment. If you use guide bars of
different lengths on the pole pruner, the length of the chain
scabbard must be matched to the guide bar to reduce the
risk of injury. It should cover the full length of the guide bar.
20.2 Battery
WARNING
To reduce the risk of a short circuit, which could lead to
electric shock, fire and explosion, never transport the battery
in a metal container or near metal objects (e.g., paper clips,
nails, coins, keys), @ 8.
When transporting the battery:
► Place the battery in a non-metal container or carton and
secure it against impact or damage. Never transport the
battery in a metal or other container that is capable of
conducting electricity, or near metal objects (e.g., paper
clips, nails, coins, keys).
► If you are transporting the battery in a vehicle, secure it
and its container to prevent turnover, impact and damage.
STIHL batteries comply with the requirements set forth in
UN-Manual ST/SG/AC.10/11/Rev.7/Part III, Subsection
38.3.
Commercial air, vessel and ground transportation of lithium
ion cells and batteries is regulated. The battery is classified
as a UN 3480, Class 9, packaging group II product. Shipping
it, either as a complete tool or the battery, requires
compliance with all applicable shipping regulations. Check
with the ground, vessel, air cargo or passenger airline to
determine if transport is prohibited or subject to restrictions
or exemptions prior to shipping or travel.
Normally, no further conditions have to be met by the user in
order to transport STIHL batteries by road to the power tool's
operating site. Check and comply with any special
regulations that may apply to your situation.
For further information please go to
www.stihlusa.com/battery-transportation-safety.
36
21 Storing the Pole Pruner and Battery
20.3 Charger
To properly transport the charger:
► Disconnect the charger from the electrical outlet.
► Remove the battery from the charger.
► Wrap the power supply cord and attach it to the charger,
@ 21.4.
► When transporting the charger in a vehicle, ensure that it
is secured in a manner that prevents turnover, impact and
damage.
21 Storing the Pole Pruner and Battery
21.1 Pole Pruner
WARNING
Store the pole pruner indoors in a dry, secure place that
cannot be accessed by children or other unauthorized users,
@ 6.4. Never store the battery in the pole pruner or
charger. Improper storage can result in unauthorized use
and damage to the pole pruner, @ 6.4.
When storing the pole pruner for thirty days or longer:
► Remove any wood chips or debris from the battery
compartment.
► Remove the chain and guide bar.
► Clean and spray the guide bar with a resin solvent, such
as STIHL Resin Remover and Lubricant.
► Clean the pole pruner, @ 22.1.
► Fill up the chain oil tank, @ 14.5.2.
► Store the pole pruner indoors in a dry and secure location,
out of the reach of children and other unauthorized
persons.
21.2 Storing the Pole Pruner on a STIHL Wall
Bracket
The pole pruner can be stored on a STIHL wall bracket.
0458-813-8621-A

Publicidad

loading