Publicidad
Idiomas disponibles
Idiomas disponibles
INSTALLATION
3. While pushing booster against
vehicle seat, pull one adjuster
strap tight and then the other.
Make sure that both LATCH/UAS
connectors are securely attached
to the vehicle's lower anchors.
4. The entire seat bottom should sit
flat on the vehicle seat.
NOTE:
Even with LATCH/UAS connectors properly
attached and adjusted, child seat will still have
movement against the vehicle seat back and bottom.
IMPORTANT: DO NOT
use LATCH/UAS if installation
interferes with vehicle seat belt.
IMPORTANT:
When using booster seat in center seating
position, make sure it is stable and does not rock from
side-to-side, otherwise choose a different seating
position.
18
Solana® 2 LATCH™
Follow the previous instructions in reverse order.
1.
3
2. Disconnect LATCH/UAS connectors from vehicle
3. Pull lower anchor adjuster straps to recess the
4
Swivel outward to the locked position for use. Swivel inward
to the recessed and locked position when not in use.
WARNING: DO NOT
liquids as this could burn a child.
IMPORTANT:
excess weight on the cup holder which
could cause it to break.
DISENGAGING LOWER ANCHOR INSTALLATION
Reach under the bottom of the booster seat and
depress the cam lock lever while pulling the seat
away from the vehicle seat back until the lower
anchor straps are extended all the way.
anchors.
LATCH/UAS connectors into the back of the booster
seat bottom for safe storage.
CUP HOLDERS
use with hot
Do not step on or put
diono.com | diono.ca
INSTALLATION
19
Publicidad
