Protool AGP 230-26 R Manual Original página 14

Angle grinder AGP 230-26 R
– original instruction
Table of contents
1 Symbols ................................... 14
2 Tool Specifi cations ...................... 14
3 Application ................................ 14
4 Controls .................................... 14
5 Safety instructions ..................... 15
5.1 Safety instructions for all work
activities ................................... 15
5.2 Other safety instructions for
all work activities ....................... 16
5.3 Additional safety instruction
for grinding and cutting work ....... 17
5.4 Additional safety instructions
for cutting ................................. 17
5.5 Additional safety instructions
to surface grinding ..................... 17
5.6 Additional safety instructions
for grinding with a wire brush ...... 18
5.7 Turner safety instructions ............ 18
5.8 Service ..................................... 18
5.9 Residual risk .............................. 18
5.10 Emission levels .......................... 18
6 Installation of protective
elements .................................. 19
6.1 Cover ....................................... 19
6.2 Auxiliary handle ......................... 19
6.3 Rotating handle ......................... 19
7 Fitting the grinding disc .............. 20
7.1 Assembly with the standard
clamping nut ............................. 20
7.2 Assembly with the FASTFIX
quick-action fi xing nut ................ 20
8 Activation ................................. 20
8.1 Switching on and off ................... 20
8.2 Continuous use .......................... 20
8.3 Control electronics ..................... 20
9 Work instructions ....................... 21
10 Maintenance .............................. 21
11 Environmental Protection /
Disposal.................................... 21
12 Warranty .................................. 22
13 Declaration of Conformity ............ 22
14
GB
1 Symbols
Double insulation
Warning of general danger
Risk of electric shock
Use protective goggles!
Wear ear protection!
Read the instructions
Not to be included in municipal refuse
Advice or tip
►
2 Tool Specifi cations
Voltage
Frequency
Power consumption
Idle number
of revolutions
Grinding wheel
Peripheral speed
Grinding spindle thread
Starting current reduction
Weight
Protection class
3 Application
The tool is designed to be used for cutting,
grinding and brushing of metal and stone
materials without the use of water. To divide
stone it is necessary to use a guide rail or
a suction cover.
The user himself is liable for any improper
use.
4 Controls
[1-1] Switch
[1-2] Safety and locking button
[1-3] Arrest button
[1-4] Rotating handle
[1-5] Ventilation openings
[1-6] Locking plunger of the spindle
[1-7] Gear box
[1-8] Grinding spindle
230 – 240 V
50 / 60 Hz
2600 W
6600 min
–1
max. 230 mm
80 m.s
–1
M 14
•
5.9 kg
II /