KEKAI ARKANSAS Manual De Instrucciones página 25

High heat and low heat setting:
can switch between ℃ and ℉ (please note that this function is not
If you press the "HEATER" button on the keyboard for 3 seconds, you
available on the remote control). The startup default setting
temperature is 22℃ (72℉); If the room temperature is lower than the
setting temperature, it will go into heating mode. If you need it to
work in low mode, please press the "HEAT" button on the keyboard or
remote control to change it from high to low operation mode. The
first time you press the button, the current heating operation mode
will be displayed on the display window (eg, the current heating
setting mode is high heating); when you press the button again, the
display will show that it has changed to low heating mode; if you press
the button again, the non-heating mode window will be displayed and
the heating mode will be turned off; If you press the "HEAT" button
again, the heating mode will enter into a three-mode cycle (high, low
and off). Each time you press the button, you will hear a short beep; if
you want to turn off the heating function, you can also press the
"DOWN" button on the keyboard or remote control, so that the
setting temperature is lower than the room temperature; then you
can turn off the heating function. When the heating is turned off, the
internal fan will continue to run for 10 seconds before stopping.
Timer Settings:
The timer can be set between 0-12 hours; when power on, the default
time is 0 hours. You can change the timer setting using the "TIME"
button on the keypad or remote control. Once the electric fireplace is
working, press the «TIME» button on the keyboard or on the remote
control; then the display window temperature display will change to
"00" and flash; From now on, every time you press the «TIME» button,
the hours will change (00-30-1h-21h-31h-41h-51h-61h-71h-81h-91h). -
101h-111h-121h); When the time you need is displayed, stop pressing.
If the screen is flashing for 10 seconds and you do not press any
button, the room temperature will be shown again and it will remain
permanently lit.
Temperature increase adjustment buttons:
The temperature setting range is 15℃ (60℉) - 36℃ (97℉) (default
setting temperature is 22℃/72℉). Each time you press the "UP"
button on the keyboard or remote control, the temperature will
increase by 1℃/1℉. If you hold it down for a long time on the
keyboard (do not release the button, as the numbers change), the set
temperature will continue to increase to the maximum (note that this
long-press function is not available on the remote control) . When the
temperature is set, the temperature display window will flash. After
10 seconds without pressing the temperature adjustment button, the