KEKAI ARKANSAS Manual De Instrucciones página 26

display window will return to showing the temperature of the room
and will remain permanently lit.
Temperature decreases adjustment buttons:
The temperature setting range is 15℃ (60℉) and 36℃(97℉) (default
setting temperature is 22℃/72℉). Each time you press the "DOWN"
button on the keyboard or remote control, the temperature will
decrease by 1℃/1℉. If you hold it down for a long time on the
keyboard (do not release the button, as the numbers change), the set
temperature will continue to decrease to the minimum (note that this
long-press function is not available on the remote control) . When the
temperature is set, the temperature display window will flash. After
10 seconds without pressing the temperature adjustment button, the
display window will return to showing the temperature of the room
and will remain permanently lit.
FLAME REGULATOR:
At the first use, the brightness of the flame is at the highest level. The
brightness of the flame has five levels. If you want to adjust the
brightness of the flame, each time you press the "DIMMER" button,
the brightness of the front and back of the led lamp will dim; each
time you press the «DIMMER» button, the intensity will decrease one
level; when the flame has reached its lowest intensity, press the
«DIMMER» button again so that the flame returns to the highest level
of intensity.
FLAME COLOR CHANGE FUNCTION:
When the heater starts, the default color of the flame is orange. Press
the "COLOR MODE" button on the remote control to switch from the
temperature display screen to the color display screen.
The color sequence is: C1, C2, C3, C4, C5, C6, C7, C8 and C9. Each time
you press the button, the LED lights will light up in the following
sequence: (C1) orange, (C2) green, (C3) blue, (C4) white, (C5) green +
orange, (C6) orange + blue, (C7) orange + white, (C8) green + blue and
(C9) green + white.
Child lock function:
The electric fireplace has a lock function on the remote control and
keyboard. After the setting of all the functions of the products is
finished, press the "UP" and "DOWN" buttons on the keyboard at the
same time for 3 seconds or the child lock button on the remote
control for one second. A short acoustic signal will be heard indicating
that the electric fireplace is locked, and the buttons do not work. The
center screen display window will enter the flashing state. After 10
seconds,
the window will return to displaying the room temperature. If you
want to use the keyboard and remote control again, press the "UP"