Faults - WIKA TF37 Manual De Instrucciones

6. Faults

6. Faults
Personnel: skilled personnel
CAUTION!
Physical injuries and damage to property and the environment
If faults cannot be eliminated by means of the listed measures, the instrument
must be taken out of operation immediately.
▶
Ensure that pressure or signal is no longer present and protect against
accidental commissioning.
▶
Contact the manufacturer.
▶ If a return is needed, please follow the instructions given in chapter
8.2 "Return".
WARNING!
Physical injuries and damage to property and the environment caused
by hazardous media
Upon contact with hazardous media (e.g. oxygen, acetylene, flammable
or toxic substances), harmful media (e.g. corrosive, toxic, carcinogenic,
radioactive), and also with refrigeration plants and compressors, there is a
danger of physical injuries and damage to property and the environment.
Aggressive media with extremely high temperatures and under high pressure
or vacuum may be present at the instrument.
▶ For these media, in addition to all standard regulations, the appropriate
existing codes or regulations must also be followed.
▶ Wear the requisite protective equipment (see chapter 3.6 "Personal
protective equipment").
For contact details, see chapter 1 "General information" or the back page of
the operating instructions.
Faults
No output signal
WIKA operating instructions model TF37
Causes
Sensor break
Measures
Replace instrument
EN
13