Siemens SINUMERIK 840D Instrucciones De Programacion página 220

3 3
Ciclos de fresado 12.97
08.99
3.15 Fresado de cajas con islas - CYCLE73, CYCLE74, CYCLE75
;Definir los contornos de mecanizado
ABNAHME4_CONT:
CYCLE74("RANDA01",,)
CYCLE75("INS11A01",,)
CYCLE75("INS1A01",,)
CYCLE75("INS2A01",,)
CYCLE75("INS3A01",,)
LABELFINAL:
;Programación del centrado
T4 M6
D1 M3 F1000 S4000
MCALL CYCLE81(10,0,1,-3,)
REPEAT ABNAHME4_BEAR ABNAHME4_BEAR_END
MCALL
;Programación del taladrado
T2 M6
D1 M3 F2222 S3000
MCALL CYCLE81(10,0,1,-12,)
REPEAT ABNAHME4_BEAR ABNAHME4_BEAR_END
MCALL
GOTOF ABNAHME4_BEAR_END
ABNAHME4_BEAR:
REPEAT ABNAHME4_CONT ENDLABEL
CYCLE73(1015,"ABNAHME4_DRILL","ABNAHME4_MILL1",
"3",10,0,1,-12,0,,2,0.5,,2000,400,0,,,,)
ABNAHME4_BEAR_END:
;Programación de vaciado
T3 M6
D1 M3 S4000
REPEAT ABNAHME4_CONT ENDLABEL
CYCLE73(1011,"","ABNAHME4_MILL1","3",10,0,1,
-12,0,,2,0.5,,2000,400,0,,,,)
;Programación del vaciado de material restante
T6 M6
D1 M3 S4000
REPEAT ABNAHME4_CONT ENDLABEL
CYCLE73(1012,"","ABNAHME4_2_MILL4","3",10,0,1,
-12,0,,2,0.5,,1500,800,0,,,,)
;Programación del acabado
T5 M6
D1 M3 S4500
REPEAT ABNAHME4_CONT ENDLABEL
CYCLE73(1013,"","ABNAHME4_MILL3","3",10,0,1,
-12,0,,2,,,3000,700,0,,,,)
M30
© Siemens AG 2002 All rights reserved.
3-220
SINUMERIK 840D/840Di/810D Instrucciones de programación Ciclos (PGZ) – Edición 11.02