Publicidad
Idiomas disponibles
Idiomas disponibles
ENGLISH
P5
Before removing the tub use a capacimeter to measure (at the ends of the
connector on the black and white cable) the global capacity of transducers both
between and 12ηF 16ηF to evaluate the actual efficiency of the transducers.
1. Follow procedure P1 to remove the front panel
2. Follow procedure P2 to remove the board
3. To remove the tub strongly press from the bottom to the top to unglue the tub
edges from the adhesive tape fixing them.
P6
Cleaning of the filter of the charge solenoid valve
1. Close the feeding cock of the system.
2. Unscrew the ring nut of the charge hose from the rear coupler (M).
3. Clean the mesh filter.
4. Remount the charge hose.
5. Re-open the feeding cock.
36
Tub removal
ATTENTION
Publicidad
