Publicidad
Idiomas disponibles
Idiomas disponibles
The term "device" or "product" in the warnings and in the description of the instructions
refers to
Drain cleaning machines.
2.1.
a)
The plug of this device must fit into the outlet. Do not modify the plug in any
way. Original plugs and matching outlets reduce the risk of electric shock.
b)
Do not touch the device with wet or damp hands.
c)
Do not use the cord in an unintended manner. Never use it to carry the device
or to pull the plug out of the socket. Keep the cord away from heat sources,
oil, sharp edges or moving parts. Damaged or tangled cords increase the risk
of electric shock.
d)
When operating the product outdoors, use an extension cord designed for
outdoor use. Using an extension cord designed for outdoor use reduces the
risk of electric shock.
e)
If you cannot avoid using the product in a wet environment, use a residual
current device (RCD) to connect the product to electrical mains. Using an RCD
reduces the risk of electric shock.
f)
Do not use the appliance if the power cord is damaged or shows signs of wear.
A damaged power cord should be replaced by a qualified electrician or the
manufacturer's service department.
g)
To avoid electric shock, do not immerse the cable, plug, or the appliance itself
in water or other liquid. Do not use the appliance on wet surfaces.
2.2.
a)
Keep the work area tidy and well lit. Disorder or poor lighting can lead to
accidents. Be foresighted, watch what you are doing and use common sense
when using the unit.
b)
Do not use the unit in an explosive area, for example in the presence of
flammable liquids, gases or dust.
c)
If in doubt as to whether the product is working properly or found to be
damaged, contact the manufacturer's technical service.
d)
Repairs to the device may only be carried out by the manufacturer's service.
Do not attempt to repair the product on your own!
e)
In case of open flames or fire, use only dry powder or snow (CO2) fire
extinguishers to extinguish the live equipment.
f)
No children or unauthorized persons are allowed in the work area. (Inattention
may result in loss of control of the unit.)
g)
Use the unit in a well-ventilated area.
h)
Check the condition of the safety stickers regularly. Replace them if they are
illegible.
Electrical safety
Safety in the workplace
Publicidad
