MSW Motor Technics MSW-DCM-03 Manual De Instrucciones página 20

1 - Control knob:
It is used to turn the device on/off and control the rotation direction of the spiral.
OFF: stop
FOR: "forward" rotation direction
REV: "reverse" rotation direction
CAUTION! Before connecting the machine to the power supply, check that the
control knob is in the OFF position.
2 - Residual current device
3 - Foot switch
3.2. Preparation for operation
POSITIONING OF THE UNIT
The ambient temperature must not exceed 40°C and ambient humidity should not
exceed 85%. Place the unit in a way that ensures good air circulation. Maintain a
minimum clearance of 10 cm from any wall of the unit. Keep the unit away from any