TRAPP TRF 50 Manual De Instrucciones página 33

www.trapp.com.br
Attention!
When the shredder is operating, do neither
put your hand inside the green crop feeder
nor in the downward exit. Such action will
cause serious damages to your physical
integrity (Fig. 1).
Power
Model
TRF 50
2)
TRF 70
2)
TRF 80
2)
TRF 80F
2)
TRF 90
1)
TRF 300
1)
TRF 300F
1)
TRF 400
2)
TRF 400F
2)
Environmental conditions limits:
Notes: 1) The machines come out from the factory without switch (on/off) and electric motor connection, being at the
customer's discretion connecting it in the desired voltage, as available in the region. The motor connection
scheme is made available in the motor itself, so that the customer may proceed with the connection.
2) The machines come with some disassembled components when they leave the factory. Before putting them to work,
see the assembly instructions in this manual.
Note:
TRAPP makes no warranty for the motor being damaged due to reversed or wrong connection, as
described in the manual or for incorrectly assembling the equipment.
Technical Characteristics
Voltage
(cv) (V)
127
1.5
220
1.5 127/220
2 127/220
2 127/220
2 127/220
2 127/220
2 - 3 220/380
2 127/220
2 - 3 220/380
2 127/220
2 - 3 220/380
1)
2 127/220
2 - 3 220/380
1)
Attention!
Whenever cleaning or servicing, make
sure the equipment is off and the blades
are still as they continue to move for some
seconds.
Rotation (rpm)
50 Hz 60 Hz
- 3,600
3,000 3,600
3,000 3,600
3,000 3,600
3,000 3,600
3,000 3,600
3,000 3,600
3,000 3,600
3,000 3,600
3,000 3,600
3,000 3,600
3,000 3,600
3,000 3,600
3,000 3,600
Temperature: 40
Air relative humidity: 80%
Motor
Monophase
Monophase
Monophase
Monophase
Monophase
Monophase
Three-phase
Monophase
Three-phase
Monophase
Three-phase
Monophase
Three-phase
° C
33