GB
General information
MF-Model is a vaccine storage freezer and
icepack freezer. It has two compartments;
one for vaccine storage and one for icepack
freezing.
Unpacking
1. Unpack the appliance and check that it
has not been damaged. If you observe
any damage, inform your supervisor.
2. Check the rating for correct voltage and
frequency.
3. Open and remove all internal packing
material.
Installation
The appliance must be placed in a well ven-
tilated room, not in direct sunlight and away
from other heating sources.
Place the appliance on the floor, ensure
that it is level. Distance between the wall
and the back and left side of the appliance
must be minimum 50 mm and the distance
be tween the wall and the right side of the
appliance must be minimum 100 mm. (fig.
6).
If installed in a room with other refrigerators/
freezers, ensure a minimum distance bet-
ween the appliances of minimum 200 mm.
There must be at least 30 mm clearance
between the base of the appliance and the
floor.
IMPORTANT! There must be free access to
the ventilation grille
fig. 5
Adjustable feet
Level the appliance by screwing the adjust-
able feet up or down.
If the appliance is to be placed on a soft
surface, e.g. floorboards or a carpet, it is
best to recheck whether the appliance is
still level after a period of time as the under-
lying surface may give under the weight of
the appliance.
8
fig. 6
fig. 7