ST MP2 500-R Li D48 Serie Manual De Instrucciones página 117

3.1.1 Intended use
This machine was designed and manufactured for cutting
(and collecting) grass in gardens and grassy areas, in
proportion to its cutting capacity, carried out by a pedestrian
operator.
Generally speaking this machine can:
1. Mow the grass and collect it in the grass catcher.
2. Mow the grass and discharge it on the ground from the
rear section.
The use of special attachments provided for by the
Manufacturer as original equipment or which may be
purchased separately, allows this work to be done in various
operating modes, illustrated in this manual or the instructions
that accompany the single attachments.
3.1.2 Improper use
Any other usage not in keeping with the afore-mentioned ones
may be hazardous and harm persons and/or damage things.
Examples of improper use may include, but are not limited to:
– Allowing children, animals or other passengers to
ride on the machine as they could fall off and injure
themselves or compromise safe driving by the operator.
– Letting oneself be transported by the machine.
– Using the machine to tow or push loads.
– Using the cutting means on surfaces other than grass.
– Using of the machine for leaf or debris collection.
– Using the machine to trim hedges, or for cutting
vegetation other than grass.
– Use of the machine by more than one person.
IMPORTANT Improper use of the machine will invalidate
the warranty, relieve the Manufacturer from all liabilities, and
the user will consequently be liable for all and any damage or
injury to himself or others.
3.1.3 User types
This machine is intended for use by consumers, i.e. non-
professional operators.
It is intended for "DIY" use only.
IMPORTANT The machine must be used by one operator.
3.2 SAFETY SIGNS
There are various symbols on the machine (Fig. 2.0). They are
used to remind the operator of the behaviour to follow to use it
with the necessary attention and caution.
Meaning of symbols:
Warning. Read the instructions
before operating the machine.
Danger! Risk of hurled objects.
Keep all persons away from the
work area whilst working.
Only for lawnmowers with
combustion motors.
Danger! Danger of cutting yourself.
Cutting means in operation. Do not
put hands or feet near or under the
opening of the cutting means.
Be careful when using the sharp cutting
means. Do not put hands or feet near or
under the opening of the cutting means.
The cutting means continues to turn
even after the motor has been switched
off. Remove the safety key (deactivation
device) before doing maintenance.
IMPORTANT Any damaged or illegible
decals must be replaced. Order replacement
decals from an authorised service centre.
3.3 IDENTIFICATION LABEL
The identification label holds the following data (Fig.1.0).
1. Sound power level.
2. Conformity marking.
3. Year of manufacture.
Type of machine.
4.
5. Serial number.
6. Name and address of Manufacturer.
7. Article code.
8. Max. motor operation speed.
9. Weight in kg.
10. Power voltage and frequency.
11. Electrical protection rating.
12. Nominal power.
Write the identification data of the machine in the specific
space on the label on the back of the cover page.
IMPORTANT Quote the information on
the product identification label whenever you
contact an Authorised Service Centre.
IMPORTANT The example of the Declaration of
Conformity is provided on the last pages of the manual.
3.4 MAIN COMPONENTS
The machine is composed of a series of main
components that have the following functions (Fig.1.0):
A. Chassis: this is the casing that houses
the rotating cutting means.
B. Motor: drives both the cutting means
and the wheel traction (if available).
C. Cutting means: the element
designed to cut the grass.
D. Rear discharge guard: it is a safety device which
prevents objects collected by the cutting means
from being hurled away from the machine.
EN - 4