6.
The cut grass is not col-
lected in the grass catcher.
7.
Mowing is difficult.
8.
Excessive noise and/
or vibration is experi-
enced whilst working.
9.
Battery power reserve is
low.
10. The battery charger is not
recharging the battery.
15. OPTIONAL ATTACHMENTS
15.1
BATTERIES
Different capacity batteries are available to
suit specific operating requirements (Fig.24).
The list of approved batteries for this machine
is found in the "Technical Data" table.
15.2
BATTERY CHARGER
Device used to recharge the battery (Fig.25).
The cutting means has collided with a
foreign object and received a knock.
The inside of the chassis is dirty.
The cutting means is not in good condition. Contact a Technical service centre for the
Cutting means fittings are loose or the
cutting means is damaged.
Severe working conditions requiring
greater current absorption.
Battery
is
insufficient
requirements.
Battery is not correctly inserted in the
battery charger.
Unsuitable environmental conditions.
Dirty contacts.
The battery charger is not energised.
Faulty battery charger.
Immediately turn off the motor and remove the
safety key.
Inspect for damage and contact a Technical
service centre for the replacement of the cutting
means if necessary (par. 8.1).
Clean the inside of the chassis to ease the grass
discharge towards the grass catcher (par. 7.3.2).
sharpening or replacement of the cutting means.
Immediately turn off the motor and remove the
safety key.
Contact an authorised Technical Assistance
Centre for checks, replacements or repairs
(par. 8.1).
Optimise operations (par. 7.2.1).
for
operating
Use additional batteries or batteries with
extended power reserve (par. 15.2).
Check it is correctly inserted (par. 7.2.3).
Recharge the battery in places with suitable
temperatures
instruction manual).
Clean the contacts.
Check it is plugged in and the power socket is
energised.
Replace with an original spare part.
If the problem persists, refer to the
battery/battery charger manual.
EN - 13
(see
battery/battery
charger