Denon AVR-X1200W Manual Del Usuario página 131

Contents Connections
HDMI control function
A recent addition to the HDMI standard is CEC (Consumer Electronics Control), which allows control signals from one device to communicate with
another device via the HDMI cable connection.
Setting procedure
1
Enable the HDMI control function of this unit.
Set "HDMI Control" to "On". (v p. 165)
2
Turn the power on for all the devices connected by
HDMI cable.
3
Set the HDMI control function for all devices connected
by HDMI cable.
Please consult the operating instructions for the connected
0
devices to check the settings.
Carry out steps 2 and 3 should any of the devices be unplugged.
0
4
Switch the television input to the HDMI input connected
to this unit.
Front panel Display
Playback Settings
5
Switch the input source of this unit to check that video
from the player connected by HDMI is played back
correctly.
6
When you turn the TV's power to standby, check that
the power of this unit also goes to standby.
NOTE
0 Some functions may not operate depending on the connected TV or player. Check
the owner's manual of each device for details beforehand.
131
Rear panel
Tips
Remote Index
Appendix