Denon AVR-X1200W Manual Del Usuario página 19

Contents Connections
q w e w r t
A Rod antennas for Bluetooth/wireless LAN
Stand this antenna upright when connecting to a network via wireless
LAN, or when connecting to a handheld device via Bluetooth.
(v p. 60)
90°
320°
Front panel Display
Playback
q
90°
320°
19
Rear panel
Settings
0 The antenna clip can be removed from the rear panel.
A Rotate the antenna clip 90 degrees to the left.
B Pull the antenna clip out towards yourself.
0 The antenna clip is needed when transporting this unit. Keep it in a
safe place.
0 Attach the antenna clip by following the steps for removing it in
reverse.
B PRE OUT connectors
Used to connect a subwoofer with built-in amplifier or power amplifier
for ZONE2.
"Connecting the subwoofer" (v p. 33)
0
"Connection 2 : Connection using an external amplifier" (v p. 142)
0
C Analog audio connectors (AUDIO)
Used to connect devices equipped with analog audio connectors.
(v p. 52)
D Digital audio connectors (DIGITAL AUDIO)
Used to connect devices equipped with digital audio connectors.
"Connection 2 : TV equipped with an HDMI connector and
0
incompatible with the ARC (Audio Return Channel)" (v p. 49)
"Connection 3 : TV equipped without an HDMI
0
connector" (v p. 50)
"Connecting a set-top box (Satellite tuner/cable TV)" (v p. 52)
0
E NETWORK connector
Used to connect to a LAN cable when connecting to a wired LAN
network. (v p. 59)
Remote
Tips Appendix
Index