Denon AVR-X1200W Manual Del Usuario página 285

Setting Up
Connecting the Acoustimass
CAUTION: Before making these connections, turn off your receiver to prevent unwanted noises when you plug the Acoustimass
module into it.
The system input cable is 20 feet (6.1 m) long and connects to your surround receiver. Unlike the speaker cables, this input cable has a
multi-pin connector that inserts into the Audio Input connector on the module.
At the other end of the system input cable, multiple wire pairs "unzip" for easy reach and insertion into terminals on your receiver. A red
collar marks a wire as positive (+) wire.
CAUTION: Do NOT connect your module to the TV, which lacks the required amplification.
The single RCA plug at that end is for use ONLY with a receiver that handles low-frequency effects and provides an
LFE/SUBWOOFER connector.
RCA plug for
LFE only
8 - English
module to the receiver
®
Module input
connector
System input
cable connector
Wire pair
®