Descargar Imprimir esta página

Denon AVR-X1200W Manual Del Usuario página 212

Ocultar thumbs Ver también para AVR-X1200W:

Publicidad

Contents
Connections
o Add New Feature
Display new features that can be downloaded to this unit and perform
an upgrade.
Upgrade Package:
Upgrade Status:
Upgrade Start:
0 See the Denon website for details about upgrades.
0 When the procedure is complete, "Registered" is displayed in this menu and
upgrades can be carried out. If the procedure has not been carried out, "-------"
is displayed.
The ID number shown on this screen is needed when carrying out the
procedure.
The ID number can also be displayed by pressing and holding the main unit's
TUNER PRESET CH + and STATUS for at least 3 seconds.
0 If the upgrade is not successful, an error message identical to those in
"Firmware" - "Update" will appear on the display. Check the settings and
network environment and then perform the upgrade again.
Front panel
Display
Playback
Display the items to be upgraded.
Display a list of the additional functions
provided by the upgrade.
Execute the upgrade process.
When the upgrade starts, the menu
screen is shut down. During the upgrade,
the amount of upgrade time which has
elapsed is displayed.
Rear panel
Settings
Notes concerning use of "Update" and "Add New Feature"
In order to use these functions, you must have the correct system
0
requirements and settings for an Internet connection. (v p. 59)
Do not turn off the power until updating or upgrading is completed.
0
Approximately 1 hour is required for the updating/upgrading procedure
0
to be completed.
Once updating/upgrade starts, normal operations on this unit cannot
0
be performed until updating/upgrading is completed. Furthermore,
there may be cases where backup data is reset for the parameters,
etc., set on this unit.
If the update or upgrade fails, press and hold the X on the main unit for
0
more than 5 seconds, or remove and re-insert the power cord. "Update
Retry" appears on the display and update restarts from the point at
which update failed. If the error continues despite this, check the
network environment.
0 Information regarding the "Update" function and "Add New Feature" will be
announced on the Denon website each time related plans are defined.
212
Remote
Tips
Appendix
Index

Publicidad

loading