Descargar Imprimir esta página

Sunny Health & Fitness SF-E3607 Manual Del Usuario página 11

Ocultar thumbs Ver también para SF-E3607:

Publicidad

Idiomas disponibles

Idiomas disponibles

We value your experience using Sunny Health and Fitness products. For assistance with parts or
troubleshooting, please contact us at support@sunnyhealthfitness.com or 1-877-90SUNNY (877-
907-8669).
Attach the Left Pedal Support (No. 5L) to the Left Crank (No. 22) with Left Hinge Bolt (No.
38L), Wave Washer (No. 45), Spring Washer (No. 41) and Left Nylon Nut (No. 42L). Tighten and
secure with Wrench (No. 101) and Spanner (No. 102). Please note that you must turn the Left
Hinge Bolt (No. 38L) counter-clockwise to tighten, and screw the Left Nylon Nut (No. 42L)
clockwise onto the threaded end of the Connecting Joint (No. 40L).
NOTE: Do not tighten the bolts yet.
Attach the Left Swing Tube (No. 6L) to the Left Pedal Support (No. 5L) with Hex Bolt (No. 30),
Flat Washer (No. 31) and Nylon Nut (No. 32) with Spanner (No. 99) and Spanner (No. 103).
Tighten Hex Bolt (No. 24), Hex Bolt (No. 30) and Left Nylon Nut (No. 42L) using Spanner (No.
99) and Spanner (No. 103) and cover the bolts with Caps (No. 23 & 57 & 43 & 36).
Repeat the steps above to assemble the right side, but please note that you must turn the Right
Hinge Bolt (No. 38R) clockwise to tighten, and screw the Right Nylon Nut (No. 42R) counter-
clockwise onto the threaded end of the Connecting Joint (No. 40R).
Tighten all the Inner Hex Bolts (No. 16) on the Handlebar Post (No. 2) for step 2 using Wrench
(No. 100).
STEP 3:
Remove pre-assembled 2 Hex Bolts
(No. 24), 2 Spring Washers (No. 52), 2
Flat Washers (No. 25) and 2 Wave
Washers (No. 54) from the Shaft (No.
27).
Insert the Shaft (No. 27) into the
Handlebar Post (No. 2) then insert
Wave Washer (No. 54) and attach the
Left Swing Tube (No. 6L) to the left side
of Shaft (No. 27). Next, put the other end
with Flat Washer (No. 25), Spring
Washer (No. 52) and Hex Bolt (No. 24)
that were removed onto Shaft (No. 27)
to fix the other end. Tighten and secure
with Spanner (No. 99) and Spanner
(No. 103).
NOTE: Do not completely tighten the
bolts yet.
CAUTION:
Hinge Bolt (No. 38) is label L or R. Left
Nylon Nut (No. 42L) is black on the
inside and Right Nylon Nut (No. 42R)
is white on the inside.
10

Publicidad

loading