Publicidad
Idiomas disponibles
Idiomas disponibles
We value your experience using Sunny Health and Fitness products. For assistance with parts or
troubleshooting, please contact us at support@sunnyhealthfitness.com or 1-877-90SUNNY (877-
907-8669).
STEP 4:
Attach the 2 Pedals (10L/R) to the
corresponding 2 Pedal Supports (No.
5L/R) with 4 Hex Bolts (No. 33), 4 Flat
Washers (No. 34) and 4 Nylon Nuts (No.
35) using Spanner (No. 102).
NOTE: There are 3 positions on the Pedal
Support (No. 5L/R), numbered 1, 2, and 3,
that you can install the Pedals (No. 10L/R).
Adjust the pedal position to suit your
comfort level. Make sure both Left and
Right Pedals (No. 10 L/R) are set at the
same position numbers.
STEP 5:
Insert the Pulse Wire (No. 50) through the
hole of Handlebar Post (No. 2) then pull it
out from the hole of computer bracket at the
top of the Handlebar Post (No. 2).
Remove pre-assembled 2 Inner Hex Bolts
(No. 51) and 2 Spring Washers (No. 52)
from the Handlebar (No. 8) first.
Handlebar
Attach
Handlebar Post (No. 2) with 2 Inner Hex
Bolts (No. 51) and 2 Spring Washers (No.
52) that were removed using Wrench (No.
100). Lastly, put on the Clamp Cover (No.
53).
Remove pre-assembled 4 Inner Hex Bolts
(No. 16), 4 Spring Washers (No. 52) and 4
Arc Washers (No. 44) from the Swing
Tubes (No. 6L/R). Attach the 2 Handlebars
(No. 7L/R) to the corresponding Swing
Tubes (No. 6L/R) and secure them with 4
Inner Hex Bolts (No. 16), 4 Spring
Washers (No. 52) and 4 Arc Washers (No.
44) using Wrench (No. 100).
11
(No.
8)
onto
the
Publicidad
