Aritech DDI602AM Manual De Instalación página 3

15
Ja
Ra
5
Alarm N/C
Rt
Tamper
7
J TEOL
Fault
4
Jf
Rf
Alarm N/O
9
22R
16
EN: Installation Sheet
Package
The package contains:
•
1 x DDI602AM
•
1 x drilling template for fixing holes
•
3 x 31.75 mm wall plugs
•
3 x 31.75 mm screws
•
1 x lens mask
•
2 x additional curtain shutters
•
1 x tamper cup
•
2 x tamper caps (different lengths)
•
1 x plastic locking tool
•
1 x installation sheet
•
1 x front cover screw cap
P/N 146655999-1 (ML) • REV G • ISS 14DEC20
6
Jt
8
3
10
15a
0V
+12V
ALARM N/O
ALARM N/O
TAMPER
TAMPER
ALARM N/C
DEOL
ALARM N/C
TEOL
FAULT/AM
FAULT/AM
REMOTE TEST
REMOTE LED
17
Introduction
The DDI602AM Outdoor Dual PIR/AM Detector is an external
motion detector and alarm trigger that uses two independent
passive infrared detectors plus a microwave sensor module.
Programmable options include a variable pulse count and a
choice of three detection ranges: 10 m, 20 m and 30 m.
Mounting the unit
When positioning the detector please consider that the PIR
sensor is more sensitive to a movement across the beams,
and less sensitive to a movement directly towards or away
from the beams; whilst the microwave sensor is more sensitive
to movement towards and away from the sensor.
During installation, protect the electronics against water, as
trapped moisture can affect or damage the unit.
We recommend that the cable entry and screw mounting holes
be sealed from within the detector using acrylic (non-silicone
based) sealants.
3 / 48