allen+roth LP8130LBN Manual De Instrucciones página 18

TROUBLESHOOTING
PROBLEM
Fan sounds noisy.
Fan wobbles
excessively.
Not enough air
movement.
POSSIBLE CAUSE
5. Screws holding blades to blade
holders are loose.
1. Set screw in downrod support is loose.
2. Set screw in downrod/hanger ball
assembly is loose.
3. Screws securing fan blade holders to
motor hub are loose.
4. Blade holders are not seated properly.
5. Hanger bracket and/or ceiling outlet box
is not securely fastened.
6. Fan blades are out of balance.
Downrod is too short.
CORRECTIVE ACTION
5. Tighten screws securely.
1. Tighten set screws securely in
downrod support.
2. Tighten the set screw in the
downrod/hanger ball assembly.
3. Check to be sure screws that
attach the fan blade holders to the
motor hub are tight.
4. Check to be sure the fan blade
holders seat firmly and
uniformly to the surface of the
motor housing. If holders are
seated incorrectly, loosen the
screws and retighten.
5. Tighten the hanger bracket
screws to the outlet box, and
secure outlet box.
6. Interchanging position of fan
blades can redistribute the
weight and result in smoother
operation. For example,
exchange blades in positions 1
and 3 or 1 and 4. If this does
not improve wobble, exchange
2 and 4 or 2 and 5.
If possible, consider using a longer
downrod (not included).
18
Lowes.com/allenandroth