Publicidad
Idiomas disponibles
Idiomas disponibles
Routine Maintenance
Robot Sensors and Charging Contacts
Wipe sensors and charging contacts of the robot by using a soft, dry cloth:
· Cliff sensors at the bottom of the robot
· Charging contacts at the back of the robot
· Return-to-base sensor at the front of the robot
· Bumper at the front of the robot
· LDS on the top of the robot
Bumper
Return-to-Base
Sensor
LDS
Charging Contacts
Note: Wet cloth can damage sensitive elements within the robot and base.
Please use dry cloth for cleaning.
Self-Wash Base Charging Contacts and Overflow
Sensor
Cliff Sensors
Robot Restarting
If the robot stops responding or cannot be turned off, press and hold down
the
button for 3 seconds to turn the robot on.
Battery
The robot contains a high-performance lithium-ion battery pack. Make sure
that the battery remains well-charged for daily use to maintain optimal
battery performance. If the robot is not used for an extended period of time,
turn it off and put it away. To prevent damages from over-discharging, charge
the robot at least once every three months.
Charging Contacts
button for 10 seconds to forcefully turn it off. Then, press and hold the
Overflow Sensor
19
EN
Publicidad
